#

Zep Products

NC Brake Parts Cleaner

Sizes

  • 13 oz net weight - 1/Case

NC Brake Parts Cleaner

PRODUCT #ZAA731

This high performance product easily removes brake fluid, grease, oil and other contaminants from brake parts without the need for disassembly. Powerful blasting spray effectively cleans brake linings, cylinders, drums, springs, pads, clutches and C.V. joints. Rapid and complete evaporation leaves no residue, and this formula does not contaminate waste oil with chlorinated solvents.

Benefits+

  • Less than 45% VOC
  • Degreases brake parts instantly
  • Removes grease, oil & brake fluid
  • Leaves no residue

Directions & Pro Tips+

  1. Protect rubber, fibberglass, and plastic parts from over spray.
  2. Remove cap and insert extension tube provided into spray tip.
  3. Hold can upright and keep tip pointed at dot on valve cup.
  4. Spray parts liberally and allow to run off.
  5. Air dry.
  6. Repeat as necessary.

  7. IMPORTANT: Do not spray on hot or warm surfaces. This product will affect certain plastics, rubber, various elastomers, and some paints. Always test in an inconspicuous area to check product for compatibility.

DANGER+

Vapors from this product may travel or be moved by air currents and ignited by pilot lights, other flames, smoking, sparks, heaters, electrical equipment, static discharge, or other ignition sources at locations distant from point of product use. Adequate ventilation must be provided during use. Waste oil contaminated with this product poses a flammability hazard.

Sizes

  • 13 oz net weight - 1/Case