#

Zep Products

Carb Spray

Sizes

  • 12 oz net weight - 12/Case

Carb Spray

PRODUCT #ZAA736C

Use Zep Carb Spray to clean your carburetors.

    After being idle for too long, dirt, gum, varnish deposits and other solid material can get stuck in your carburetor, making it hard for your engine to start. Use this product to free those sticky valves, stuck heat risers and throttle linkages. There’s no lead or silicone. So, it will not harm your oxygen sensors, catalytic converters or fuel injectors.

    You can periodically use Zep Carb Spray on cars, trucks, boats, lawnmowers, and other vehicles to keep your fuel systems clean, efficient and trouble free.

    Benefits+

    • High pressure blast spray
    • Restores lost air flow
    • Cleans carb, choke, linkage, heat riser, throttle plate & pcv valve
    • Quickly dissolves & removes harmful gum, carbon & varnish deposits

    Directions & Pro Tips+

    Always hold can in an upright position during use. Remove cap and insert extension tube into spray tip.

    1. Turn engine off and remove air cleaner.
    2. Spray small amount into carburetor throat walls and outside surfaces.
    3. Spray a small amount into float chamber through float chamber vent.
    4. Start engine and run above idle for 60 seconds readjust air fuel mix - then stop engine.
    5. Spray balance to outside surfaces and linkage.

    IMPORTANT: Do not spray or spill on painted surfaces.

    Sizes

    • 12 oz net weight - 12/Case